What is a 1/2 Face Cord of Wood? [Know Everything This]
A 1/2 face cord of wood is the amount of wood that has to be stacked on top of one another to reach a height of four feet. The 1/2 face cord is the measurement for a standard 8-foot tall stack of firewood. It’s a good way to measure how much wood you have for the winter, or just to know if you have enough for your next project.
A 1/2 face cord of wood is the amount of wood that can be cut from a tree with a saw in half. It is very common to see “face cords” on lumber and home improvement stores because it gives the buyer an idea of how much lumber they are getting for their money.
What is a 1/2 face cord of wood?
A 1/2 face cord of wood is an amount of wood that can be cut into two-and-a-fifth lengths.
Check out my 24 years of Woodworking database HERE
It’s the length used to measure firewood sold in the United States and Canada, equal to one-half a “face” (1 x 2.5 feet) or 128 cubic feet for small splits; up to 64 cubic feet for large splits or cords. A stack 4x8x4 inches high, 8x8x4 inches long, and 4 cubic feet in volume.
The following table shows 1/2 face cord to be equal to one half a “face” (1 x 2.5 feet) or 64 cubic pounds for small splits; up to 128 cubic feet for large splits or cords. A stack of wood four by eight by four inches high is sent into the ground, with the dimensions doubled vertically so that it is eight times as long and made up of four stacks stacked on top of each other.
The following table shows 1/2 face cord (1 x 2.5 feet or 64 cubic pounds) to be equal to a stack 4x8x4 inches high, 8x8x4 inches long, with volume eight times that amount. A circle with edge lengths as shown would have an area equivalent to 128 square yards depending on its exact form is used only for estimates of the amount of firewood that can be cut from a stack.
A great choice for splitting wood into medium size splits, 1/2 face cord (1 X 2.5 feet or 64 cubic pounds) is always large enough to cut 2 small and 5 larger starting blocks. It measures 6x6x9 inches high- 9 inches by nine long with dimensions that are almost twice as tall as they are wide. In a highly efficient system, 1/2 face cords are easier to split than the larger size, but not as difficult as they would be for splitting smaller splits.
How big is a half-face of wood?
The half face of wood is a piece of wood that has been cut in half so that the width and length are equal. The term is often used to describe the shape of a board, for example when describing lumber or timber.
What is half-face cord firewood?
Half-face cord firewood is a type of cord wood that is split into two pieces. It’s often used as kindling because it burns faster than whole cords and the smaller size makes it easier to carry.
What does 1/2 cord of wood look like?
A cord of wood is 128 cubic feet and a 1/2 cord is 64 cubic feet. It’s a unit used to measure firewood, and it’s typically measured as the volume of a stack of wood four feet high, eight feet long, and four feet wide.
What’s the difference between a face cord and a cord of wood?
A face cord is a measurement of wood in the United States and Canada. It is a standardized unit of volume that has been defined by law, which means it can be bought or sold with confidence.
On the other hand, a cord of wood is one standard length (4 feet) of firewood.
How much wood is in a half-face cord?
The amount in a half-face cord is “64 cubic feet”. That’s all it takes to stack four feet high, eight feet long, and 4feet wide.
