What Is the Actual Size of a 2x4?

The actual size of a standard surfaced 2x4 is 1 1/2 inches thick by 3 1/2 inches wide. The “2x4” name is the nominal size, from the rough board before it is dried and planed at the mill. Length is usually as labeled, so an 8-foot 2x4 is about 8 feet long. Thickness and width are the parts that come out smaller.


Looking for ready-made plans? You can browse the TedsWoodworking plans library (affiliate link), a third-party plans library that, per its vendor, is searchable by project type and includes cut lists. It is not affiliated with Ted Wood Plans.
Why a 2x4 is smaller than its name
The name comes from the rough-sawn board, before it goes through the mill. After the wood is dried, the faces are planed smooth so the board is straight enough to frame with. That surfacing is what takes it down to 1 1/2 by 3 1/2 inches. It is not that someone sands half an inch off later in the shop.
Length is a different story. An 8-foot 2x4 is usually about 8 feet long, and a 10-foot board is about 10 feet. Thickness and width are the measurements that shrink from the sticker name.
Nominal vs actual 2x4 dimensions
These are the standard dressed sizes for a construction 2x4 in the United States:
| Measurement | Nominal (name) | Actual size |
|---|---|---|
| Thickness | 2 inches | 1 1/2 inches (38 mm) |
| Width | 4 inches | 3 1/2 inches (89 mm) |
Common lengths are sold as labeled:
| Listed length | Typical actual length |
|---|---|
| 8 feet | 8 feet (96 inches) |
| 10 feet | 10 feet (120 inches) |
| 12 feet | 12 feet (144 inches) |
| 16 feet | 16 feet (192 inches) |
Other common board sizes
The same naming habit applies to the rest of the 2x family. A full nominal vs actual lumber sizes chart is here if you need the wider list, including 1x boards.
| Nominal size | Actual size (inches) | Actual size (mm) |
|---|---|---|
| 2x3 | 1 1/2 × 2 1/2 | 38 × 64 |
| 2x4 | 1 1/2 × 3 1/2 | 38 × 89 |
| 2x6 | 1 1/2 × 5 1/2 | 38 × 140 |
| 2x8 | 1 1/2 × 7 1/4 | 38 × 184 |
| 2x10 | 1 1/2 × 9 1/4 | 38 × 235 |
| 2x12 | 1 1/2 × 11 1/4 | 38 × 286 |
On 2x8, 2x10 and 2x12 boards, the width drops by about 3/4 inch rather than 1/2 inch, which is why a 2x10 lands at 9 1/4 inches wide instead of 9 1/2.
How thick is a 2x4?
A surfaced 2x4 is 1 1/2 inches thick. That is the figure to write on a cut list or a materials list, not 2 inches. If a plan already accounts for real 1 1/2-inch stock, you will buy the right number of boards the first time.
Frequently Asked Questions
What is the actual size of a 2x4?
A standard surfaced 2x4 is 1 1/2 inches thick and 3 1/2 inches wide. The “2x4” name is the nominal size, from the rough board before it is dried and planed at the mill.
How thick is a 2x4?
A 2x4 is 1 1/2 inches thick. That is the number to use in a cut list, not 2 inches and not a half inch.
Why is a 2x4 smaller than 2 by 4 inches?
The name comes from the rough-sawn board. After the mill dries the wood and planes the faces smooth, you are left with the dressed size of 1 1/2 by 3 1/2 inches.
Is an 8-foot 2x4 actually 8 feet long?
Length is usually as labeled, so an 8-foot 2x4 is about 96 inches long. Thickness and width are the parts that come out smaller than the name on the sticker.
What is the actual size of a 2x6 or a 2x8?
A 2x6 is 1 1/2 by 5 1/2 inches. A 2x8 is 1 1/2 by 7 1/4 inches. A 2x10 is 1 1/2 by 9 1/4, and a 2x12 is 1 1/2 by 11 1/4. The full list is on the nominal vs actual lumber sizes chart.
Related posts:
- Nominal vs Actual Lumber Sizes Chart (2x4 to 2x12)
- Best Wood for a Workbench Top
- How to Glue Wood Together
- Woodworking Plans
This page contains affiliate links. If you buy through them, Ted Wood Plans may earn a commission at no extra cost to you. Affiliate disclosure.